LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Lubrication System (2GR-FXS) - Service Information) >> Oil Pressure Switch >> Removal [12/2023 - ] >> Procedure

Removal [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13

  2. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 2

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. GTY1235160Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Wire Harness Protector - -
      1. Disconnect the wire harness protector.
      2. Disconnect the engine oil pressure switch assembly connector.
      3. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
scientia non olet · About LEMON Manuals