LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Hybrid Transaxle System (Pc60) - Service Information >> TCM >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. A/T CODE REGISTRATION 

    Refer to REGISTRATION [10/2022 - ]

  2. K0/WSC LEARNING VALUE REGISTRATION 

    Refer to REGISTRATION [10/2022 - ]

  3. PRECAUTION 
    NOTE:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [10/2022 - ]
  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to REMOVAL [10/2022 - ]

  5. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10

  6. REMOVE TCM 
    1. GTY1124938Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Disconnect by pushing down the lever. - -
      1. Disconnect the TCM connector.

        HINT: 

        Disconnect the TCM connector by releasing the claw and pushing down the lever.

      2. Remove the 3 nuts and TCM from the No. 1 TCM bracket.
  7. REMOVE NO. 1 TCM BRACKET 
    1. GTY1129129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals