LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Control System (2GR-FSE) - Diagnostic Codes (1 Of 5)) >> SFI System >> DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025: Camshaft Position "B" - Timing Over-Retarded (Bank 2) [09/2014 - 11/2017] >> Description

DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025: Camshaft Position "B" - Timing Over-Retarded (Bank 2) [09/2014 - 11/2017]: Description

WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0013.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0014 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1) Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
  • Valve timing
  • Camshaft timing oil control valve assembly (for exhaust camshaft of bank 1)
  • Oil control valve filter (RH)
  • Oil pipe
  • Camshaft timing exhaust gear assembly (bank 1)
  • ECM
Comes on DTC stored
P0015 Camshaft Position "B" - Timing Over-Retarded (Bank 1) Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
  • Valve timing
  • Camshaft timing oil control valve assembly (for exhaust camshaft of bank 1)
  • Oil control valve filter (RH)
  • Oil pipe
  • Camshaft timing exhaust gear assembly (bank 1)
  • ECM
Comes on DTC stored
P0024 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2) Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
  • Valve timing
  • Camshaft timing oil control valve assembly (for exhaust camshaft of bank 2)
  • Oil control valve filter (LH)
  • Oil pipe
  • Camshaft timing exhaust gear assembly (bank 2)
  • ECM
Comes on DTC stored
P0025 Camshaft Position "B" - Timing Over-Retarded (Bank 2) Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
  • Valve timing
  • Camshaft timing oil control valve assembly (for exhaust camshaft of bank 2)
  • Oil control valve filter (LH)
  • Oil pipe
  • Camshaft timing exhaust gear assembly (bank 2)
  • ECM
Comes on DTC stored