Removal [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 5
REMOVE SPARE WHEEL COVER TRAY
Refer to PROCEDURE - Step 6
REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 7
REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 8
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 1
REMOVE FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 13

REMOVE FUEL PUMP CONTROL ECU

Disengage the 4 claws and open the 2 covers.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 2 bolts and 2 rope hook assemblies.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a clip remover, remove the 4 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the clamp and turn back the luggage compartment trim cover LH.

Disconnect the 2 fuel pump control ECU connectors.

Remove the 2 nuts and fuel pump control ECU from the vehicle body.
NOTE:
Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

REMOVE FUEL PUMP CONTROL ECU BRACKET

Remove the 2 screws and fuel pump control ECU bracket