Removal [10/2015 - 11/2017]: Procedure

WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 5
REMOVE SPARE WHEEL COVER TRAY
Refer to PROCEDURE - Step 6
REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 7
REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 8
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 1
REMOVE FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 13

REMOVE FUEL PUMP CONTROL ECU ASSEMBLY

Disengage the 4 claws and open the 2 covers.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 2 bolts and 2 rope hook assemblies.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a clip remover, remove the 4 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the clamp and turn back the luggage compartment trim side cover LH.

Disconnect the fuel pump control ECU assembly connector.

Disengage the clamp to disconnect the wire harness from the fuel pump control ECU assembly.

Remove the 2 nuts and fuel pump control ECU assembly from the vehicle body.

NOTE:

Do not reuse the fuel pump control ECU assembly if it has been dropped or subjected to a severe impact.