LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (2GR-FKS) - Service Information >> Oil Level Sensor >> Removal [11/2017 - ] >> Procedure

Removal [11/2017 - ]: Procedure

  1. DRAIN ENGINE OIL 

    See step  1 [11/2017 - 11/2021], or see step  1 [11/2021 - ]

  2. REMOVE FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 14

  3. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 24

  4. REMOVE OIL PIPE WITH STRAINER SUB-ASSEMBLY (for AWD) 

    Refer to PROCEDURE - Step 25

  5. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Disconnect the engine oil level sensor connector.
      GTY784723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    2. Remove the clip from the engine oil level sensor.
      GTY822869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    3. Disengage the clamp.
      GTY825748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    4. Remove the 2 nuts and engine oil level sensor.
  6. REMOVE OIL LEVEL SENSOR BRACKET 
    1. Remove the oil level sensor bracket.
      GTY779280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
scientia non olet · About LEMON Manuals