LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 450h+ Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Outlets (Int) - Service Information >> Center Power Outlet Socket >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 20 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 20 [03/2024 - ]
  2. REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY 
    1. GTY1069329Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the No. 2 power outlet socket assembly as shown in the illustration.
  3. REMOVE NO. 2 POWER OUTLET SOCKET COVER 
    1. GTY1068748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  4. REMOVE USB CHARGER SOCKET 
    1. GTY1071889Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
scientia non olet · About LEMON Manuals