Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

PRECAUTION

NOTE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]

REMOVE BATTERY SERVICE COVER PLATE
Refer to PROCEDURE - Step 2
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to PROCEDURE - Step 3

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Refer to PROCEDURE - Step 19 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 19 [03/2024 - ]

DISCONNECT NO. 2 EARTH WIRE
See step 2

REMOVE CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY

NOTE:

If the cam timing control motor with EDU assembly has been struck or dropped, replace it.

REMOVE CAM TIMING CONTROL MOTOR O-RING