LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Fuel System - Service Information) >> FUEL INJECTOR (for Port Injection) >> Removal [03/2023 - ] >> Procedure

Removal [03/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    NOTE:

    After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]
  2. DISCHARGE FUEL SYSTEM PRESSURE 

    Refer to PRECAUTION [11/2021 - ]

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

  4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 25 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 25 [03/2024 - ]
  5. REMOVE NO. 3 ENGINE COVER 

    Refer to PROCEDURE - Step 26 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 26 [03/2024 - ]

  6. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 16

  8. DISCONNECT ENGINE WIRE 

    Refer to PROCEDURE - Step 6

  9. REMOVE PURGE VALVE (PURGE VSV) 

    Refer to PROCEDURE - Step 13

  10. REMOVE AIR TUBE ASSEMBLY 
    Refer to PROCEDURE - Step 8
  11. REMOVE FUEL DELIVERY GUARD 
    1. GTY1076651Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE EFI FUEL PIPE CLAMP 
    1. GTY1076980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. DISCONNECT FUEL TUBE SUB-ASSEMBLY 
    1. GTY1077322Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the fuel tube sub-assembly from the fuel delivery pipe.

        Refer to PRECAUTION [11/2021 - ]

  14. REMOVE FUEL DELIVERY PIPE 
    NOTE:

    If fuel intrudes into the combustion chamber, there may be adverse effects to the engine main body.
    1. GTY1076798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 bolts and fuel delivery pipe with the 4 port fuel injector assemblies from the cylinder head sub-assembly.
        NOTE:

        Be careful not to drop the port fuel injector assemblies when removing the fuel delivery pipe.

  15. REMOVE FUEL DELIVERY SPACER 
    1. GTY1076988Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE INJECTOR VIBRATION INSULATOR 
    1. GTY1076965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE NO. 5 ENGINE WIRE 
    1. GTY1076967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE PORT FUEL INJECTOR ASSEMBLY 
    NOTE:
    GTY993474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    • Attach a tag or label with the corresponding cylinder number to each port fuel injector assembly so that they can be installed to their original locations.
    • Cover the port fuel injector assemblies with plastic bags to prevent damage and contamination.
    1. GTY1076963Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals