LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Audio / Video System - Service Information (Coupe)) >> Radio Receiver >> Installation [03/2017 - 05/2023] >> Procedure

Installation [03/2017 - 05/2023]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL RADIO RECEIVER ASSEMBLY 
  2. INSTALL NO. 1 RADIO BRACKET 
    1. Install the No. 1 radio bracket with the 5 screws.
      GTY817836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 2 RADIO BRACKET 
    1. Install the No. 2 radio bracket with the 5 screws.
      GTY817837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 NAVIGATION WIRE 

    Refer to PROCEDURE - Step 3

  5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET 
    1. Connect the connectors.
    2. Attach the clamp as indicated by the arrows in the shown in the illustration.
      GTY794798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    3. Install the radio receiver assembly with bracket with the 4 bolts.
  6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY 

    Refer to REMOVAL [03/2017 - 05/2023]

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [03/2017 - 04/2020] , or refer to INITIALIZATION [04/2020 - 05/2023]

  8. INSTALL NO. 2 DECK BOARD 

    Refer to PROCEDURE - Step 13 [03/2017 - 01/2021] , or refer to PROCEDURE - Step 13 [01/2021 - ]

scientia non olet · About LEMON Manuals