Installation [03/2017 - 05/2023]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MULTI-DISPLAY

Connect the 5 connectors and attach the clamp.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Attach the claw in the order shown in the illustration to install the multi-display.

Fig 1: Multi-Display Installation Sequence
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:
If the claws are not attached in the order shown in the illustration, the multi-display may become damaged.

Install the 4 bolts.

INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Refer to PROCEDURE - Step 15 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 15 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 15 [04/2020 - 05/2023]
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
Refer to PROCEDURE - Step 19 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 19 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 19 [04/2020 - 05/2023]
INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
Refer to INSTALLATION [03/2017 - 05/2023]
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
Refer to INSTALLATION [03/2017 - 05/2023]
INSTALL COMBINATION METER ASSEMBLY
Refer to INSTALLATION [03/2017 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 2

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [03/2017 - 04/2020] , or refer to INITIALIZATION [04/2020 - 05/2023]
INSTALL NO. 2 DECK BOARD
Refer to PROCEDURE - Step 13 [03/2017 - 01/2021] , or refer to PROCEDURE - Step 13 [01/2021 - ]