Installation [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL METER HOOD SPACER

Attach the claws to install the meter hood spacer.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL COMBINATION METER ASSEMBLY

Temporarily install the combination meter assembly in the direction indicated by the arrow in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

Connect the 2 connectors and attach the wire harness clamps.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Attach the guides and claws in the direction indicated by the arrow in the illustration.

Install in this Direction

Install the combination meter assembly with the 4 screws.

INSTALL METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 38 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 38 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 38 [04/2020 - 05/2023] , or refer to INSTALLATION [05/2023 - ]
INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
Refer to PROCEDURE - Step 39 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 39 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 39 [04/2020 - 05/2023] , or refer to INSTALLATION [05/2023 - ]
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Refer to PROCEDURE - Step 18 [03/2017 - 09/2018] , or refer to PROCEDURE - Step 18 [09/2018 - 05/2023] , or refer to INSTALLATION [05/2023 - 09/2023] , or refer to INSTALLATION [09/2023 - ]