LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Service Information (Convertible) (1 Of 2) >> Seat Memory Switch >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. REMOVE FRONT DOOR TRIM COVER SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 2 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 2 [05/2023 - ]

  2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 4 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 4 [05/2023 - ]

  3. REMOVE SEAT MEMORY SWITCH 
    1. Disconnect the connector.
      GTY817620Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Connector
      Screw
    2. Remove the 2 screws.
    3. Using moulding remover A, detach the claw and remove the seat memory switch.
      GTY954048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bracket from the front door trim board sub-assembly LH.
      GTY829558Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
scientia non olet · About LEMON Manuals