Removal [03/2023 - 03/2024]: Procedure

Refer to REMOVAL [03/2023 - 03/2024] 

Refer to PROCEDURE - Step 6

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Rear Suspension Member Sub-assembly	-	-
   *a	Turn	*b	Hold
   	Turning Direction		Front of Vehicle
   	SST Bolt Position	-	-

   1. Using SST, remove the rear No. 1 differential mount cushion.
      • SST: 09316-12010 
      • SST: 09570-24011 
      NOTE:

      • Before using SST, apply grease to the SST bolts.
      • Be sure to use the correct combination of SST.
      • Be sure to use the correct direction of SST.
      • Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.
      • Do not tilt the bolts of SST.