LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Seat Belt - Service Information (Coupe)) >> Rear Seat Inner Belt Assembly >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR SEAT CUSHION ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE REAR SEAT CUSHION LOCK HOOK 

    Refer to PROCEDURE - Step 2

  3. REMOVE QUARTER INSIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 17 [03/2017 - 05/2023] , or refer to PROCEDURE - Step 18 [05/2023 - ]

  4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH 
    1. GTY819995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Connector
      Bolt

      Disconnect the connector.

    2. Remove the bolt.
    3. Pass the wire harness and connector of the rear No. 1 seat inner belt assembly LH through the hole on the quarter trim panel assembly LH.
      NOTE:

      Take care not to damage the wire harness and connector.

    4. Remove the rear No. 1 seat inner belt assembly LH.
scientia non olet · About LEMON Manuals