LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Seats - Service Information (Coupe) (1 Of 2)) >> Rear Seat Assembly >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR SEAT CUSHION ASSEMBLY 
    1. Move both front seats to the frontmost position and collapse them to the front in advance.
    2. Place your hands at the positions shown in the illustration and pull in the removal direction to detach the 2 hooks on the front of the rear seat cushion from the 2 rear seat cushion lock hooks.
      GTY805173Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Rear Seat Cushion Lock Hook
      *a Hook on Front of Rear Seat Cushion
      Place Hand Here
      Remove in this Direction
      NOTE:
      • Detach the rear seat cushion front side hooks one at a time.
      • If the hook on the front of the rear seat cushion assembly is detached, replace the rear seat cushion lock hook with a new one.
    3. Pull in the removal direction shown in the illustration to detach the hooks on the rear of the rear seat cushion assembly from the 2 child restraint seat anchor brackets.
      GTY826968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Child Restraint Seat Anchor Bracket
      *a Hook on Rear of Rear Seat Cushion
      Remove in this Direction
    4. Remove the rear seat cushion assembly.
      NOTE:

      Do not damage the rear seat cushion assembly, body and body interior.

  2. REMOVE REAR SEAT CUSHION LOCK HOOK 
    NOTE:
    • If the hook on the front of the rear seat cushion assembly is detached, replace the rear seat cushion lock hook with a new one.
    • Do not reuse the rear seat cushion lock hook after removing it.

    HINT: 

    Use the same procedure for the other side.

    1. Insert 2 thin-bladed screwdrivers between the sleeve and body of the rear seat cushion lock hook.
      GTY820276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Body
      *b Sleeve
    2. Pull up the 2 thin-bladed screwdrivers to detach the claws and remove the rear seat cushion lock hook.
  3. REMOVE REAR SEAT CUSHION HOLDER BRACKET 

    HINT: 

    Use the same procedure for the other side.

    1. Remove the bolt and rear seat cushion holder bracket.
      GTY824572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE REAR SEAT SIDE GARNISH 

    Refer to PROCEDURE - Step 3

  5. REMOVE REAR SEATBACK COVER 

    HINT: 

    Use the same procedure for the other side.

    1. Insert your hand in the gap between the seatback cover as shown in the illustration and pull back to detach the clips and remove the rear seatback cover.
      GTY778310Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
  6. REMOVE REAR SEATBACK ASSEMBLY LH 
    1. Remove the nut and 2 bolts.
      GTY828008Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Nut
      Bolt
      Remove in this Direction
    2. Pull down in the direction of the arrow shown in the illustration to remove the rear seatback assembly LH.
      NOTE:

      Do not damage the rear seatback assembly LH, body and body interior.

  7. REMOVE REAR SEATBACK ASSEMBLY RH 

    HINT: 

    Use the same procedure described for the LH side.

scientia non olet · About LEMON Manuals