LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LC 500 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Windows >> Window / Glass - Service Information (Convertible) >> Front Passenger Side Power Window Switch >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. REMOVE FRONT DOOR ASSIST GRIP ASSEMBLY RH 

    Refer to PROCEDURE - Step 5 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 5 [05/2023 - ]

  2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 7 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 7 [05/2023 - ]

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Disconnect the connector.
      GTY818033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 7 screws of the backside of the front door trim board sub-assembly RH.
    3. Remove the screw of the face of the front door trim board sub-assembly RH.
      GTY836698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the power window regulator switch assembly with the No. 1 switch base as shown in the illustration.
      GTY794184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
    5. Remove the 2 screws.
      GTY818029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Detach the guide and remove the No. 2 switch base from the No. 1 switch base.
    7. Using a thin-bladed screwdriver, detach the claw and remove the power window regulator switch assembly from the No. 2 switch base.
      GTY836697Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the thin-bladed screwdriver tip before use.

scientia non olet · About LEMON Manuals