Removal [09/2018 - 10/2020]: Procedure

Refer to PROCEDURE - Step 24

1. Remove the tool box.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Loosen the nut, and disconnect the cable from the negative (-) battery terminal.
   NOTE:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Refer to INITIALIZATION [09/2018 - 10/2020]

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Detach the claw and disconnect the battery terminal cap.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disconnect the clamp spring assembly of the positive (+) battery terminal from the battery.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Disconnect clamp spring assembly in this direction

3. Loosen the nut and disconnect the cable from the positive (+) battery terminal.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Remove the 2 nuts and battery clamp sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Disconnect the battery exhaust hose from the battery.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

6. Remove the battery.
7. Lift up and pull the battery along the slope to remove it as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Lift and pull in this direction
   *a	Slope