Removal [05/2023 - ]: Procedure
- PRECAUTION WARNING:
Be sure to read precaution thoroughly before servicing.
Refer to PRECAUTION [05/2023 - ]
NOTE:After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to REMOVAL [05/2023 - ]
- REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to REMOVAL [05/2023 - ]
- REMOVE NO. 3 HEATER TO REGISTER DUCT
Refer to PROCEDURE - Step 2
- REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
- REMOVE NO. 3 INSTRUMENT PANEL WIRE
- Disconnect the 2 airbag connectors.NOTE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
HINT:
Refer to How to Connect or Disconnect Airbag Connector:
Refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [05/2023 - ]
- Detach the wire harness clamp and remove the No. 3 instrument panel wire.
- Disconnect the 2 airbag connectors.