Removal [05/2023 - ]: Procedure
- REMOVE FRONT DOOR SCUFF PLATE LH
See step 9
- REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure described for the LH side.
- REMOVE FRONT DOOR OPENING TRIM COVER LH
See step 11
- REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT:
Use the same procedure described for the LH side.
- REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER LH
See step 13
- REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER RH
See step 14
- REMOVE FRONT PILLAR GARNISH LH
- REMOVE FRONT PILLAR GARNISH RH
HINT:
Use the same procedure described for the LH side.
- REMOVE VISOR BRACKET COVER
HINT:
Use the same procedure for the opposite side.
- REMOVE MAP LIGHT ASSEMBLY
Refer to REMOVAL [05/2023 - ]
- REMOVE RAIN SENSOR COVER
Refer to PROCEDURE - Step 1
- REMOVE VISOR HOLDER
HINT:
Use the same procedure for the opposite side.
- Detach the visor assembly LH from the visor holder as shown in the illustration
Remove in this Direction - Turn the visor holder end approximately 90° in direction indicated by the arrow shown in the illustration.
*a 90° Remove in this Direction - Pull out the visor holder as shown in the illustration.
Remove in this Direction - Detach the claw and remove the visor holder.
- Detach the visor assembly LH from the visor holder as shown in the illustration
- REMOVE FRONT ROOF HEADLINING TRIM