Installation [05/2023 - ]: Procedure

1. Install the No. 1 radio bracket with the 3 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 2 radio bracket with the 3 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Attach the guide and clip to install the lower instrument cover with the 2 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect each connector.
2. Attach the clamp as indicated by the arrows in the shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

3. Install the radio receiver assembly with bracket with the 4 bolts.

Refer to INSTALLATION [05/2023 - ]

1. Attach the guide and claw to install the rear upper console panel.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Install the 4 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 1

1. Attach the claw and install the switch and volume set with the 4 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 1

1. Attech the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Connect the 4 connectors.
3. Attach the claw to install the radio remote tuning switch assembly in the direction of the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Install the screw.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Attach the guide and claw to install the console plate as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

Refer to INSTALLATION [05/2023 - ]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [05/2023 - ]

HINT: 

When replacing the radio receiver assembly, perform registration.

Refer to REGISTRATION [05/2023 - ]