LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 250 Base >> Repair and Diagnosis >> Electrical >> Gauges >> Interior Body Panels - Service Information (1 Of 2) >> Instrument Panel Safety Pad >> Reassembly [06/2018 - 08/2021] >> Procedure

Reassembly [06/2018 - 08/2021]: Procedure

  1. INSTALL INSTRUMENT CLUSTER FINISH PANEL END (w/ Headup Display) 
    1. Engage the 2 guides and 5 claws to install the instrument cluster finish panel end.
      GTY814432Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL 
    1. Engage the 2 guides and 2 claws as shown in the illustration to install the center instrument cluster finish panel.
      GTY822057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction (1)
      Install in this Direction (2)
  3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH 
    1. Engage the 3 guides and 3 claws to install the No. 2 defroster nozzle garnish.
      GTY814429Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH 
    1. Engage the 3 guides and 3 claws to install the No. 1 defroster nozzle garnish.
      GTY814430Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 2 No. 1 instrument panel pins with the 2 screws <D>.
      GTY814413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL NO. 3 INSTRUMENT PANEL WIRE 
    1. Engage the 4 clamps to install the No. 3 instrument panel wire.
      GTY814416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 3

  8. INSTALL ANTENNA CORD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  9. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the No. 2 heater to register duct with the 2 screws <D>.
      GTY814417Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY 

    Refer to PROCEDURE - Step 2

  11. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the No. 3 heater to register duct with the 3 screws <D>.
      GTY814419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the No. 1 heater to register duct with the 4 screws <D>.
      GTY814421Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Engage the 2 guides as shown in the illustration.
      GTY828806Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Install the defroster nozzle assembly with the 4 screws <D>.
      GTY814426Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 
    1. Engage the 2 claws.
      GTY814389Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 2 side defroster nozzle duct with the 2 screws <D>.
      GTY814391Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals