LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) >> COMPRESSOR (for M20A-FKS) >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM 

    See step  1

  2. REMOVE FAN AND GENERATOR V BELT 

    Refer to REMOVAL [10/2018 - 07/2022]

  3. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 7 [10/2018 - 08/2021] , or refer to PROCEDURE - Step 7 [08/2021 - 07/2022]

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY 
    1. Disconnect the connector.
      GTY836347Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt to disconnect the discharge hose sub-assembly.
      GTY816438Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the O-ring from the discharge hose sub-assembly.
      NOTE:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY 
    1. Remove the bolt to disconnect the suction hose sub-assembly.
      GTY816436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from the suction hose sub-assembly.
      NOTE:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY 
    1. Remove the 2 bolts and 2 nuts.
      GTY816435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor with pulley assembly.

      HINT: 

      Remove the compressor with pulley assembly from the vehicle with the stud bolts remaining in the compressor with pulley assembly.

      GTY836346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals