LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Hybrid Control System (Diagnostic Codes) (3 Of 5)) >> Hybrid Control System >> DTC P1C6A-9F: Motor Shutdown Stuck Off [10/2018 - ] >> Description

DTC P1C6A-9F: Motor Shutdown Stuck Off [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

The motor generator control ECU (MG ECU) sends shutdown signals to the inverter to cut the power supply to the generator (MG1) and motor (MG2). If the power switch is turned off, the motor generator control ECU (MG ECU) will send a GSDN (MG1 Shutdown Signal) signal and MSDN (MG2 shutdown signal) signal to check the function of the HV gate block. If a shutdown malfunction is detected, this DTC will be stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1C6A9F Motor Shutdown Stuck Off When the HV gate block function check is performed (when the power switch is turned from on (READY) to off), the MSDN (MG2 shutdown) signal is sent but the motor (MG2) inverter current and voltage (VH) do not decrease.
(1 trip detection logic)
Inverter with converter assembly Does not come on Master Warning:
Comes on
RELATED DATA LIST

DTC No. Data List
P1C6A9F
  • Ready Signal
  • VH-Voltage after Boosting