LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Hybrid Control System (Diagnostic Codes) (3 Of 5)) >> Hybrid Control System >> DTC P1606-00: Collision detected or Collision Sensor Connection (Open); DTC P160604: Collision detected or Collision Sensor Connection (Open) System Internal Failure [10/2018 - ] >> Description

DTC P1606-00: Collision detected or Collision Sensor Connection (Open); DTC P160604: Collision detected or Collision Sensor Connection (Open) System Internal Failure [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

The hybrid vehicle control ECU receives a signal that indicates a collision from the airbag ECU assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU shuts off the high voltage systems for safety.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P160600 Collision detected or Collision Sensor Connection (Open) Collision detection
A block signal is received from the airbag ECU assembly.
(1 trip detection logic)
  • Airbag ECU assembly
  • Hybrid vehicle control ECU
  • Airbag system
Does not come on Master Warning:
Comes on
P160604 Collision detected or Collision Sensor Connection (Open) System Internal Failure Collision detection
Multiple wiring malfunctions occur simultaneously.
(1 trip detection logic)
  • Hybrid vehicle control ECU
  • Airbag system
Does not come on Master Warning:
Comes on

HINT: 

If P160600 or P160604 is output, the hybrid system cannot be started unless the DTCs are cleared using the Techstream.

RELATED DATA LIST

DTC No. Data List
P160600
  • Airbag Status (Collision)
  • Airbag Status (Normal)
P160604