LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Hybrid Control System (Diagnostic Codes) (3 Of 5)) >> Hybrid Control System >> DTC P0AFC-49: Hybrid/EV Battery Sensor Module Internal Electronic Failure [10/2018 - ] >> Procedure

DTC P0AFC-49: Hybrid/EV Battery Sensor Module Internal Electronic Failure [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS AND CONNECTOR (IGCT VOLTAGE) 

    See step  1

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPLACE BATTERY VOLTAGE SENSOR. Refer to  REMOVAL [10/2018 - 07/2022]  Refer to  REMOVAL [07/2022 - ] 

    Result: 

    NG 

    See step  2

  2. CHECK HARNESS AND CONNECTOR (BATTERY VOLTAGE SENSOR - BODY GROUND) 

    See step  2

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPAIR OR REPLACE HARNESS OR CONNECTOR (IGCT NO. 2 FUSE - BATTERY VOLTAGE SENSOR) 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR (BATTERY VOLTAGE SENSOR - BODY GROUND)