Removal [10/2018 - 07/2022]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Refer to PROCEDURE - Step 6
- REMOVE REAR ENGINE UNDER COVER LH
Refer to PROCEDURE - Step 7
- REMOVE INVERTER WITH CONVERTER ASSEMBLY
Refer to REMOVAL [10/2018 - 07/2022]
- DISCONNECT INLET HYBRID RADIATOR HOSE
Refer to PROCEDURE - Step 26
- DISCONNECT OUTLET NO. 1 HYBRID WATER PUMP HOSE
Refer to PROCEDURE - Step 27
- REMOVE MOTOR COOLING COOLER
- Slide the clip and disconnect the No. 1 motor cooling hose from the No. 1 motor cooling pipe.
- Remove the oil cooler union bolt and gasket to disconnect the No. 2 motor cooling pipe from the hybrid vehicle transaxle assembly.
- Remove the bolt and No. 1 oil cooler tube clamp from the hose bracket.
- Slide the clip and remove the No. 2 motor cooling pipe from the No. 2 motor cooling hose.
- Remove the 3 bolts and motor cooling cooler from the hybrid vehicle transaxle assembly.NOTE:
Make sure not to remove the No. 1 motor cooling hose and No. 2 motor cooling hose from the motor cooling cooler as the motor cooling cooler may be deformed.
- Slide the clip and disconnect the No. 1 motor cooling hose from the No. 1 motor cooling pipe.