LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Hybrid Battery Control System (Service Information) (2 Of 2)) >> Service Plug Grip >> Installation [10/2018 - ] >> Procedure

Installation [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SERVICE PLUG GRIP 
    WARNING:

    Wear insulated gloves.

    NOTE:

    Before installing the service plug grip, check that no parts or tools remain and that the high voltage terminals and connectors are connected securely.

    1. While wearing insulated gloves, and temporarily install the service plug grip as indicated by the arrow (1) shown in the illustration.
      GTY786661Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Rotate the handle of the service plug grip 90° toward the HV battery and slide it in the direction indicated by the arrow (3) shown in the illustration until a click sound is heard to install the service plug grip.
  2. INSTALL BATTERY SERVICE HOLE COVER 

    See step  2

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [10/2018 - 07/2022] [10/2018 - 07/2022] Refer to INITIALIZATION [07/2022 - ] [07/2022 - ]

scientia non olet · About LEMON Manuals