Installation [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BATTERY COOLING BLOWER ASSEMBLY
1. Engage the 2 claws.
2. install the 3 bolts to install the battery cooling blower assembly.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  NOTE:
  - Be sure not to touch the fan part of the battery cooling blower assembly.
  - Do not lift the battery cooling blower assembly using the wire harness.
3. Engage the 2 clamps.
4. Connect the battery cooling blower assembly connector.
INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
See step 16
INSTALL REAR UNDER COVER
See step 17
INSTALL REAR UNDER SIDE COVER LH
Refer to PROCEDURE - Step 40 [10/2018 - 10/2020] Refer to PROCEDURE - Step 40 [10/2020 - 07/2022] Refer to PROCEDURE - Step 40 [07/2022 - ]
INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 42 [10/2018 - 10/2020] Refer to PROCEDURE - Step 42 [10/2020 - 07/2022] Refer to PROCEDURE - Step 42 [07/2022 - ]
INSTALL REAR UNDER SIDE COVER RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 41 [10/2018 - 10/2020] Refer to PROCEDURE - Step 41 [10/2020 - 07/2022] Refer to PROCEDURE - Step 41 [07/2022 - ]
INSTALL REAR DOOR SCUFF PLATE RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 43 [10/2018 - 10/2020] Refer to PROCEDURE - Step 43 [10/2020 - 07/2022] Refer to PROCEDURE - Step 43 [07/2022 - ]
INSTALL REAR SEAT CUSHION LOCK HOOK
Refer to PROCEDURE - Step 1 [10/2018 - 07/2022] Refer to PROCEDURE - Step 1 [07/2022 - ]
INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Refer to PROCEDURE - Step 5 [10/2018 - 07/2022] Refer to PROCEDURE - Step 4 [07/2022 - ]