LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electronically Controlled Brake System (Diagnostic Codes) (1 Of 4) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1259: HV Control System Regenerative Malfunction; DTC C1310: HV System Malfunction [10/2018 - ] >> Procedure

DTC C1259: HV Control System Regenerative Malfunction; DTC C1310: HV System Malfunction [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC (HYBRID CONTROL SYSTEM) 
    1. Check if a hybrid control system DTCs are output.

      Refer to DTC CHECK / CLEAR [10/2018 - ]

      Powertrain > Hybrid Control > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    Result: 

    INSPECT HYBRID CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    See step  2

  2. CHECK DTC (MOTOR GENERATOR CONTROL SYSTEM) 
    1. Check if a motor generator control system DTCs are output.

      Refer to DTC CHECK / CLEAR [10/2018 - ]

      Powertrain > Motor Generator > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    Result: 

    INSPECT MOTOR GENERATOR CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    See step  3

  3. CHECK DTC (SFI SYSTEM) 
    1. Check if a SFI system DTCs are output.

      Refer to DTC CHECK / CLEAR [10/2018 - ]

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    Result: 

    INSPECT SFI SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    See step  4

  4. RECONFIRM DTC 
    1. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [10/2018 - ]

      Chassis > ABS/VSC/TRAC > Clear DTCs 

    2. Turn the power switch off.
    3. Turn the power switch on (IG).
    4. Check if the same DTC is output.

      Refer to DTC CHECK / CLEAR [10/2018 - ]

      Chassis > ABS/VSC/TRAC > Trouble Codes 

      Result

      Result Proceed to
      DTCs C1259 and/or C1310 are output. A
      DTCs other than C1259 and C1310 are output. B
      DTCs are not output. C

    Result: 

    REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to  REMOVAL [10/2018 - 07/2022]  , or refer to  REMOVAL [07/2022 - ] 

    Result: 

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2018 - 08/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - 07/2022]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2022 - ] 

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ]