Section 1 (Engine Control System (SFI) (M20A-FXS) - Diagnostics - Introduction (1 Of 3) (Hybrid))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- SFI System
- Precaution [10/2018 - ]
- Definition Of Terms [10/2018 - ]
- Parts Location [10/2018 - ]
- System Diagram [10/2018 - ]
- How To Proceed With Troubleshooting [10/2018 - ]
- Check For Intermittent Problems [10/2018 - ]
- Basic Inspection [10/2018 - ]
- Registration [10/2018 - ]
- Initialization [10/2018 - 08/2021]
- Initialization [08/2021 - ]
- Checking Monitor Status [10/2018 - ]
- Readiness Monitor Drive Pattern [10/2018 - 10/2020]
- Readiness Monitor Drive Pattern [10/2020 - ]
- Problem Symptoms Table [10/2018 - ]
- Terminals Of ECM [10/2018 - ]
- Diagnosis System [10/2018 - ]
- DTC Check / Clear [10/2018 - ]
- Freeze Frame Data [10/2018 - 08/2021]
- Freeze Frame Data [08/2021 - ]
- Check Mode Procedure [10/2018 - ]
- Fail-Safe Chart [10/2018 - 10/2019]
- Fail-Safe Chart [10/2019 - 10/2020]
- Fail-Safe Chart [10/2020 - ]