Installation [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FUEL PUMP CONTROL ECU
- Install the fuel pump control ECU with the 2 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
NOTE:Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.
- Connect the fuel pump control ECU connector.
- Install the fuel pump control ECU with the 2 bolts.
- INSTALL DECK TRIM REAR COVER
Refer to PROCEDURE - Step 26 [10/2018 - 10/2020] , or refer to PROCEDURE - Step 26 [10/2020 - 07/2022] , or refer to PROCEDURE - Step 26 [07/2022 - ]
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 2