Removal [10/2018 - 07/2022]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- PRECAUTION NOTE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to PRECAUTION [10/2018 - 07/2022]
- DISCHARGE FUEL SYSTEM PRESSURE
Refer to PRECAUTION [10/2018 - ]
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 5
- REMOVE EGR VALVE ASSEMBLY
Refer to REMOVAL [10/2018 - 07/2022]
- REMOVE NO. 2 FUEL PRESSURE SENSOR
- Disconnect the No. 2 fuel pressure sensor connector.
- Using an 8 mm socket wrench, remove the bolt and No. 2 fuel pressure sensor holder from the fuel delivery pipe sub-assembly.
- Remove the No. 2 fuel pressure from the fuel delivery pipe sub-assembly.
- Remove the O-ring from the No. 2 fuel pressure sensor.
- Disconnect the No. 2 fuel pressure sensor connector.