Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL RH
Refer to PROCEDURE - Step 1
REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
See step [10/2018 - 07/2022] 6, or see step [07/2022 -] 5
REMOVE REAR ENGINE UNDER COVER RH
See step [10/2018 - 07/2022] 8, or see step [07/2022 -] 7
REMOVE NO. 1 SIDE RAIL REINFORCEMENT RH
Refer to PROCEDURE - Step 13 [10/2018 - 07/2022] , or refer to PROCEDURE - Step 13 [07/2022 - ]
REMOVE CRANKSHAFT PULLEY ASSEMBLY
Refer to PROCEDURE - Step 14

REMOVE TIMING CHAIN COVER OIL SEAL

Using a screwdriver, pry out the timing chain cover oil seal.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape

NOTE:

Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

HINT:

Tape the screwdriver tip before use.