LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (1 Of 6) (Hybrid)) >> SFI System >> DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2018 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs P0111: Intake air temperature sensor rationality (stuck) (after engine stop)
P0111: Intake air temperature sensor rationality (stuck) (after cold engine start)
Required Sensors/Components (Main) Intake air temperature sensor (mass air flow meter sub-assembly)
Required Sensors/Components (Related) -
Frequency of Operation Once per driving cycle
Duration -
MIL Operation 2 driving cycles
Sequence of Operation None