LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (1 Of 6) (Hybrid)) >> SFI System >> DTC P0088-00: Fuel Rail / System Pressure - Too High [10/2018 - ] >> Description

DTC P0088-00: Fuel Rail / System Pressure - Too High [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P008700.

Refer to DESCRIPTION  Refer to DTC P0087-00: Fuel Rail / System Pressure - Too Low [08/2021 - ] 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P008800 Fuel Rail / System Pressure - Too High Although the ECM is requesting the fuel pump assembly (for high pressure side) to open the spill control valve, fuel pressure increases 3 MPa (30.6 kgf/cm2 , 435 psi) from target pressure for about 10 seconds (1 trip detection logic).
  • Fuel pump assembly (for high pressure side)
  • Fuel pressure sensor (for high pressure side)
  • ECM
Comes on DTC stored SAE Code: P0088