LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (1 Of 6) (Hybrid)) >> SFI System >> DTC P0069-00: Manifold Absolute Pressure - Barometric Pressure Correlation [10/2018 - ] >> Description

DTC P0069-00: Manifold Absolute Pressure - Barometric Pressure Correlation [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

The manifold absolute pressure sensor installed to the intake manifold detects the intake manifold pressure using a built-in sensor.

An atmospheric pressure sensor is built into the ECM. When the engine is stopped, the value of the manifold absolute pressure sensor and atmospheric pressure sensor will be approximately the same as the atmospheric pressure.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P006900 Manifold Absolute Pressure - Barometric Pressure Correlation Difference between atmospheric pressure value of the absolute pressure sensor and atmospheric pressure sensor is higher than threshold value (2 trip detection logic).
  • Manifold absolute pressure sensor
  • ECM
Comes on DTC stored SAE Code: P0069