Removal [10/2018 - 07/2022]: Procedure
- PRECAUTION NOTE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to INITIALIZATION [10/2018 - 07/2022]
- CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)
Refer to CUSTOMIZE PARAMETERS [10/2018 - ]
- DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
- for Gasoline Model:
Refer to REMOVAL [10/2018 - 07/2022]
- for HV Model:
Refer to REMOVAL [10/2018 - 07/2022]
NOTE:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [10/2018 - 07/2022]
- for Gasoline Model:
- REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
Refer to PROCEDURE - Step 21 [10/2018 - 08/2021] , or refer to PROCEDURE - Step 21 [08/2021 - 07/2022]
- REMOVE METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 23 [10/2018 - 08/2021] , or refer to PROCEDURE - Step 23 [08/2021 - 07/2022]
- REMOVE COMBINATION METER ASSEMBLY