LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent / Keyless Entry System (Service Information) >> Engine Hood Courtesy Switch >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. REMOVE FRONT BUMPER ASSEMBLY (for Sport Package) 

    Refer to REMOVAL [10/2018 - ]

  2. INSTALL FRONT BUMPER ASSEMBLY (except Sport Package) 

    Refer to REMOVAL [10/2018 - ]

  3. REMOVE NO. 1 AIR CLEANER INLET (for Gasoline Model) 

    Refer to PROCEDURE - Step 11 [10/2018 - 10/2019] , or refer to PROCEDURE - Step 11 [10/2019 - 07/2022]

  4. REMOVE NO. 1 AIR CLEANER INLET (for HV Model) 

    Refer to PROCEDURE - Step 12 [10/2018 - 10/2019] , or refer to PROCEDURE - Step 12 [10/2019 - ]

  5. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) 
    1. Disconnect the connector.
      GTY792193Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 3 bolts.
      GTY792195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the clamp.
      GTY792264Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Disconnect the hood lock control cable assembly to remove the hood courtesy switch (hood lock assembly).
scientia non olet · About LEMON Manuals