Removal [10/2018 - 07/2022]: Procedure
- PRECAUTION NOTE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to INITIALIZATION [10/2018 - 07/2022]
- REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
Refer to PROCEDURE - Step 21 [10/2018 - 08/2021] , or refer to PROCEDURE - Step 21 [08/2021 - 07/2022]
- REMOVE AUTOMATIC LIGHT CONTROL SENSOR