Installation [10/2017 - 10/2020]: Procedure

INSTALL ID CODE BOX (IMMOBILIZER CODE ECU)

NOTE:

Do not reuse dropped or damaged parts.

Attach the claw as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

Attach the claw to install the ID code box (immobilizer code ECU) as shown in the illustration.

	Install in this Direction (1)
	Install in this Direction (2)

INSTALL AIR CONDITIONING UNIT ASSEMBLY
Refer to INSTALLATION [10/2017 - 10/2020]
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to PROCEDURE - Step 2

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [10/2017 - 09/2018] , or refer to INITIALIZATION [09/2018 - 10/2020]
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Refer to PROCEDURE - Step 11
PERFORM DIAGNOSTIC SYSTEM CHECK
Refer to DTC CHECK / CLEAR [10/2017 - 10/2020]
PERFORM CODE REGISTRATION
Refer to REGISTRATION [10/2017 - 10/2020]
CHECK SRS WARNING LIGHT
Refer to OPERATION CHECK [10/2017 - 10/2020]