Removal [10/2017 - 10/2020]: Procedure
- REMOVE LUGGAGE LOCK CONTROL CABLE PLATE
Refer to PROCEDURE - Step 1
- REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE
Refer to PROCEDURE - Step 2
- REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP
Refer to PROCEDURE - Step 3
- REMOVE SWITCH BEZEL
Refer to PROCEDURE - Step 4
- REMOVE NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE LUGGAGE COMPARTMENT DOOR COVER
Refer to PROCEDURE - Step 6
- REMOVE LUGGAGE DOOR CLOSER ASSEMBLY
- Disconnect the connector.
*1 Luggage Door Lock Control Cable Sub-assembly - Detach the guide and remove the 2 luggage door lock control cable sub-assemblies.
- Remove the 2 bolts.
HINT:
Remove the luggage door closer assembly while supporting it with one hand.
- Detach the guide and remove the luggage door closer assembly in the direction indicated by the arrow shown in the illustration.
Remove in this Direction
- Disconnect the connector.