LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission (U661E) - Service Information (1 Of 2)) >> Pattern Select Switch >> Removal [10/2014 - 09/2017] >> Procedure

Removal [10/2014 - 09/2017]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE CONSOLE ARMREST ASSEMBLY 

    Refer to PROCEDURE - Step 5

  2. REMOVE REAR UPPER CONSOLE PANEL 

    Refer to PROCEDURE - Step 6

  3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 7

  4. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 8

  5. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 9

  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8

  9. REMOVE NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 13

  10. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 10

  11. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  12. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 16

  13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13

  14. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  15. REMOVE SHIFT POSITION INDICATOR 

    See step  3

  16. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (PATTERN SELECT SWITCH) 
    1. Remove the 2 screws and integration control and panel assembly (pattern select switch) to the rear upper console panel sub-assembly.
      GTY502730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals