LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pressure Switching Valve >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE TURBOCHARGER SUB-ASSEMBLY 

    Refer to REMOVAL [10/2014 - ]

  2. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE 

    Refer to PROCEDURE - Step 9 [10/2014 - 09/2015] , or refer to PROCEDURE - Step 11 [09/2015 - ]

  3. REMOVE NO. 3 EXHAUST MANIFOLD HEAT INSULATOR 

    Refer to PROCEDURE - Step 7 [10/2014 - ]

  4. REMOVE NO. 4 EXHAUST MANIFOLD HEAT INSULATOR 

    Refer to PROCEDURE - Step 8 [10/2014 - ]

  5. REMOVE NO. 1 WATER BY-PASS PIPE 

    Refer to PROCEDURE - Step 9 [10/2014 - ]

  6. REMOVE OIL PRESSURE SWITCHING VALVE ASSEMBLY 
    1. Remove the bolt and oil pressure switching valve assembly from the water inlet housing.
      GTY505314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals