Removal [10/2014 - ]: Procedure

Refer to PROCEDURE - Step 9 [10/2014 - 09/2015] , or refer to PROCEDURE - Step 10 [09/2015 - ]

1. Slide the clip and disconnect the union to connector tube hose.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the No. 2 vacuum transmitting hose assembly from the vacuum pump.

1. Remove the 4 bolts and vacuum pump from the engine assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the No. 2 O-ring and No. 3 O-rings from the vacuum pump.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	No. 2 O-ring
   *2	No. 3 O-ring