LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> LS 500 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Installation [10/2020 - 10/2023] >> Procedure

Installation [10/2020 - 10/2023]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. GTY816319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Connect the 2 connectors and attach the wire harness clamp.

    2. except Sport Package:
      1. GTY775943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Install in this Direction

        Insert the pin and set the combination meter assembly in the direction of the arrow shown in the illustration.

      2. GTY971781Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Install the combination meter assembly with the 4 screws.

      3. Attach the clamp.
    3. for Sport Package:
      1. GTY782936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Install in this Direction

        Insert the pin and set the combination meter assembly in the direction of the arrow shown in the illustration.

      2. GTY836321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Install the combination meter assembly with the 4 screws.

      3. Attach the clamp.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Connect the connector.
      GTY816324Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY970858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction

      Insert the guide and attach the clip to install the instrument cluster finish panel assembly in the direction of the arrow shown in the illustration.

    3. GTY971639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction

      Push the direction of the arrow in the illustration to insert the guide and attach the claw.

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY 

    Refer to PROCEDURE - Step 23 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 22 [10/2022 - 10/2023]

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 25 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 24 [10/2022 - 10/2023]

  5. INSTALL INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 26 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 25 [10/2022 - 10/2023]

  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 27 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 26 [10/2022 - 10/2023]

  7. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD 

    Refer to PROCEDURE - Step 30 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 29 [10/2022 - 10/2023]

  8. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 30 [10/2022 - 10/2023]

  9. INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 33 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 32 [10/2022 - 10/2023]

  10. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 36 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 35 [10/2022 - 10/2023]

  11. INSTALL INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 40 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 39 [10/2022 - 10/2023]

  12. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Refer to CUSTOMIZE PARAMETERS [12/2017 - ]

scientia non olet · About LEMON Manuals