LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> LC 500 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System - Service Information (Coupe) >> Radio Receiver >> Removal [03/2017 - 05/2023] >> Procedure

Removal [03/2017 - 05/2023]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Refer to PRECAUTION [03/2017 - 05/2023]

  2. REMOVE NO. 2 DECK BOARD 

    Refer to PROCEDURE - Step 11 [03/2017 - 01/2021] , or refer to PROCEDURE - Step 12 [01/2021 - 05/2023]

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

    WARNING:
    GTY581108Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [03/2017 - 04/2020] , or refer to INITIALIZATION [04/2020 - 05/2023]

  4. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY 

    Refer to REMOVAL [03/2017 - 05/2023]

  5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      GTY791438Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Pull out the radio receiver assembly with bracket.
    3. Detach the clamp as indicated by the arrows in the shown in the illustration.
    4. Disconnect the connectors and remove the radio receiver assembly with bracket.
  6. REMOVE NO. 1 NAVIGATION WIRE 

    Refer to PROCEDURE - Step 8

  7. REMOVE NO. 1 RADIO BRACKET 
    1. Remove the 5 screws and No. 1 radio bracket.
      GTY817836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 2 RADIO BRACKET 
    1. Remove the 5 screws and No. 2 radio bracket.
      GTY817837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE RADIO RECEIVER ASSEMBLY