Removal [10/2015 - ]: Procedure
- REMOVE REAR WHEEL
Refer to PROCEDURE - Step 1
- DRAIN BRAKE FLUID NOTE:
If brake fluid leaks onto any painted surface, immediately wash it off.
- REMOVE REAR DISC BRAKE PAD
Refer to PROCEDURE - Step 2
- REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT
Refer to PROCEDURE - Step 3
- DISCONNECT REAR FLEXIBLE HOSE
- REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY
- REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG
- Remove the parking brake shoe adjusting hole plug.
- REMOVE REAR DISC
- Put matchmarks on the rear disc and the rear axle hub and bearing assembly.
*a Matchmark - Release the parking brake and remove the rear disc.
HINT:
If the rear disc cannot be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.
Contract
- Put matchmarks on the rear disc and the rear axle hub and bearing assembly.