LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Transfer Case System - Service Information) >> 4WD Control Ecu >> Removal [08/2020 - 08/2021] >> Procedure

Removal [08/2020 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to REMOVAL [08/2020 - 08/2021]

  2. REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31

  3. REMOVE 4WD ECU ASSEMBLY 
    GTY958424Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 4WD ECU assembly connector.
    2. Remove the nut and 4WD ECU assembly from the instrument panel reinforcement assembly.
scientia non olet · About LEMON Manuals