LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System (A25A-FKS) - Service Information) >> Active Control Engine Mount >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System) 

    Refer to REMOVAL [08/2020 - ] 

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 

    Refer to PROCEDURE - Step 9 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 9 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 9 [09/2022 - ]

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 

    Refer to PROCEDURE - Step 8 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 8 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 8 [09/2022 - ]

  4. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 10 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 10 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 10 [09/2022 - ]

  5. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 11 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 11 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 11 [09/2022 - ]

  6. REMOVE SUSPENSION TOWER DAMPER (w/ Performance Damper) 

    Refer to PROCEDURE - Step 4

  7. REMOVE FRONT ENGINE MOUNTING INSULATOR 
    1. Disengage the 4 clamps to separate the radiator hose, vacuum hoses and No. 2 engine wire from the No. 1 radiator bracket.
      GTY948629Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and No. 1 radiator bracket from the front engine mounting bracket.
      GTY948406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 clamps to separate the vacuum hoses from the front engine mounting insulator.
      GTY948637Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the vacuum hose from the front engine mounting insulator.
      GTY948740Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Support the engine assembly with transaxle using a jack and wooden block.
      GTY948724Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Wooden Block Placement Location
    6. Remove the 4 bolts and front engine mounting bracket.
      GTY948738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Remove the 3 nuts and front engine mounting insulator from the front frame assembly.
      GTY754280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Remove the nut and stay from the front engine mounting insulator.
      GTY948335Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals